Help and frequently asked questions
Solcrafte® is the world`s first tankless solar water heater. It has a storage tank that is integrated into the collector. The principle is easy but brilliant: Water is heated and stored directly in the solar collector. Thanks to the integrated storage tank, hot water is created the minute sunlight hits.
This process is quick and the water always remains fresh and clean. The smallest amount of sunlight can be converted into heat and used effectively – so you can save solar water heater costs.
Installation is possible on flat roofs and parallel roofs. Please refer to the handbook for information on the elevation.
INCLINED ROOF INSTALLATION
One of the most frequent installation types is the inclined roof installation. There must also be sufficient space around the Solcrafte® system. Safe installation of the Solcrafte® system, including its connection pipes, must be ensured. The space available must be matched to the space required by the system when planning its installation.
FLAT ROOF INSTALLATION
Another type of Solcrafte® installation is on a flat roof. In this case Solcrafte® is attached to a special metal construction. The optimal southern orientation can then be adapted to the available angles. A feasibility study as a first step is essential in this case, too. The installation distances and collector surface area must be taken into account to ensure safe installation.
Due to its simple and compact attachment system, Solcrafte® can also be easily installed as a free-standing system. In this case it is important that the subsoil should be reinforced (e.g. a concrete foundation, wooden construction or similar base). Care must also be taken that the system is not accessible to the public, as it poses a risk of burns. (Caution! The hot water outlet of the Solcrafte® system may heat up to 90°C).
Solcrafte® 100 with 90 l capacity for 1-2 persons in the household
Solcrafte® 150 with 145 l capacity for 2-3 persons in the household
Solcrafte® 200 with 195 l capacity for 4-5 persons in the household
Please ask your installer about the possibility of using limescale filters as well as appropriate cleaning and maintenance.
The integrated collector-storage system offers a high-quality and design-oriented solution. With its all-in-one system Solcrafte® is unique on the market.
Solcrafte® 100 with an empty weight of 40 kg and dimensions of (LxWxH) 2184x508x212 mm
Solcrafte® 150 with an empty weight of 60 kg and dimensions of (LxWxH) 2184x804x212 mm
Solcrafte® 200 with an empty weight of 75 kg and dimensions of (LxWxH) 2184x1100x212 mm
The maximum wind loads at the destination are to be taken into account to ensure that the loads can be absorbed by the system construction and that buildings and equipment are protected from damage.
Wind may exert a pushing or pulling force on the construction, with the height of the building playing a significant role. The relevant regulations applicable to the whole of Europe are described in EN 1991. The technician installing the system is obliged to adhere to the applicable installation standards.